 |
 |
 |
|
|

Matco Asia Thailand is a wholly owned American Subsidiary
in Thailand. We are run by foreign and local individuals and
provide technical products and services to almost every industry
in Thailand.
Our registered address is
Matco-Eastern (Thailand) Co., Ltd.
Moo Baan Premium Place
No.38/110 Moo 9, Soi Ramintra 14, Ramintra Road
Kwaeng Tharaeng, Khet Bangkhen Bangkok 10230
Tel:(02)3497681-4 Fax:(02)349-7685
E-Mail address: nantawan@matco-eastern.co.th
|
| Product
highlight : EESIMIX Static Mixer |
 |
It
is a well known fact that static mixers are an absolute requirement
for crude oil sampling. The same applies to water cut measurements
in large pipes, irrespective of the technology involved. A
small amount of energy is required to adequately mix oil and
water in a pipeline using conventional shear, reverse flow
and collision to produce a homogeneous mixture of water droplets
and oil droplets downstream of the mixing element with minimal
net pressure drop.
More>>
|
| Product
highlight : Instrument Continuously Monitors Water in Oil
Concentration |
 |
Water
contamination in lubricating oil accelerates the natural oxidation
that normally takes place in the oil. Even when additives
are used to retard the natural process, the presence of water
will degrade the effectiveness of certain additives potentially
leading to tight emulsions and the formation of sediment in
the oil. In addition, water in lubricating oil increases the
risk of microbial attack and contributes to further loss of
oil performance and thereby to corrosion of the components
in the various oil systems. .
More>>
|
|
Valve
Automation and Controls
|
 |
SRI was founded in 1978 and is situated
on a site of 12000 sqm. with the most modern facilities to
design, manufacture, test and equip high quality ball valves
for industrial applications: Water, Gas, Oil, Petrochemical,
Chemical and abrasive or non-abrasive Powder. Ideally located
at the junction of motorways, the port and airport, SRI provides
a wide range of industrial, commercial and technical services
to all their national and international customers.
More>>
|
 |
Designed around a unique self-locking,
spring-loaded TouchSet cam mechanism attached to a stainless
steel shaft and housed in an NEMA rated aluminum, stainless
steel or engineered resin enclosure, the AccuTrak utilizes
bushings at both ends to assure concentric turning of the
cams. For digital signaling to lights, motors, micro processors,
or peripheral equipment, two position sensors are standardly
housed within the enclosure. The requirement for tools to
adjust cam settings is unnecessary.
More>>
|
 |
Bettis is an internationally renowned company
known for its highest quality production of pneumatic, hydraulic
and electric actuators. Matco Asia has been in the business
of putting together valves, actuators and the associated instrumentation
panels in our main warehouse situated in Jurong, Singapore.
There we are able to conduct all kinds of tests, including
torque testing. Our mother company in Jurong is ISO 9000*
and is currently known as a major actuator supplier in the
region.
More>>
|
 |
Whatever valve you need to automate, we
should be able to assist you. Whether they are large ball
valves, gate valves, butterfly valves or subsea applications
using central hydraulic systems. Shafer or Bettis should have
the answers for you. Let us know what your requirements are
and we will engineer the best solution that fits your technical
or budgetary conditions.
More>>
|
 |
Anderson Greenwood is the number one choice
for instrument valves, manifolds and instrument protection
systems. Number one for range of products, and number one
for quality of manufacture and performance. With more than
40 years of innovative engineering expertise, Anderson Greenwood
is the worlds single source for instrumentation solutions.
More>>
|
 |
Series B and Mini L are compact, 2 and
3 way manual, pilot, or mechanically actuated valves. They
are ideal for operating air tools or motors, opening and closing
air lines, controlling pilots or diaphragms of lager valves
or small cylinders.
More>>
|
|
Temperature
Measurement and Controls
|
 |
Calibrators with IPTS-68 or ITS-90 Temperature
Scales are available to meet both current and future needs.
The ISO-CAL 9000 and ISO-CAL 9000+ provide both temperature
and process signal calibration capability with the added feature
of simultaneous input and output capability where needed.The
high performance MICROMITE® series permits either thermocouple
or RTD'S calibrations and provides a multi-functional instrument
which brings calibration lab accuracy to the field.
More>>
|
 |
Operating on the principle that resistance
of any given metal changes with temperature, Thermo Electric
RTD's are the sensors of choice in applications where accuracy,
stability and repeatability are critical. To maximize linearity
and temperature ranges, Thermo Electric specializes in the
use of high-purity platinum elements. In addition, a special
high temperature platinum RTD'S delivers high stability and
durability at 650°C (1202°F).
More>>
|
 |
Used throughout industry, miniature thermocouples
are generally inserted or attached directly to the media to
be measured, and usually terminate in a quick-disconnect connector
or bare wires. Industrial assemblies are used in the process
and power industries where thermocouples and RTD's are installed
in pipelines or vessels. They consist of three basic parts:
connection head, sensing element and protection well or tube.
More>>
|
|
Gas
Detection and Gas Sensors
|
 |
ISTs Model IQ-350 is a single gas
portable instrument which provides all of the features of
the IQ-250 and in addition comes standard with a built-in
sampling pump. Like the IQ-250, it can be equipped with either
a solid state or electrochemical sensor and can be configured
to detect any one of over 150 toxic and combustible gases.
The unit operates 20 hours on 4 C size alkaline
or nicad batteries, or the AC adapter/charger. The IQ-350
weighs approximately 30 ounces, including batteries.
More>>
|
 |
The MP220EX is a two channel, explosion-proof,
wall mounted, control unit rated for use in Class 1, Div.
1, Groups C & D (B optional) hazardous areas. Operation
via magnetic wand allows the unit to be operated without opening
the cover, thereby ensuring that hazardous areas do not require
declassification. Standard features include: 3 alarm setpoints
per channel, digital display per channel, common relays (optional
individual relays), operates on 110/220 VAC (autoswitching),
and 24 VDC power supply to power sensor transmitters..
More>>
|
 |
The model 4-20 IQ is a microprocessor based
intelligent sensor transmitter. It comes equipped with a digital
display which provides a local reading of the gas concentration.
Operating on 14-24 VDC power, it provides a linear 4-20 mA
output proportional to the gas concentration, and is housed
in an explosion-proof casing. The 4-20 IQ has been UL Classified
and CSA Approved Class I, Div. 1, Groups B, C, and D.
More>>
|
|
 |
 |
|